If you have an commercial ice machine, or coolers inside your store, or maybe you live in a high humidity part of the country where things just don't dry out very fast, then you've probably experienced moss, algae and mildew at your site.
There is an easy, safe and effective way to eliminate this. SPRAY&GO kills and prevents future growth of algae, mildew, mold, and moss on hard surfaces. Once treated with SPRAY&GO, the surface requires no pressure washing, scrubbing or rinsing. Just thoroughly wet the dry surface with SPRAY&GO and then forget about it. The elements (wind and rain, etc.) will slowly wash off the stain.
If the surface to be treated is not fully exposed to rainfall or is vertical, some assistance may be required to remove stains. SPRAY&GO is effective on surfaces such as: concrete, natural stone, ceramic, asphalt, painted surfaces, siding (vinyl, aluminum), textured finishes, and wood. The solution contains no bleach, abrasives, hard acids or phosphates. Mixes 6 gallons, or 24 x 32 oz. applications.
To Mix:
1. Add 6 pumps of concentrate solution to a clean 32 oz spray container (or garden type sprayer for large areas). Add water to fill container; Attach sprayer and seal. To Clean:
2. Apply solution until the surface is thoroughly saturated. Allow to air dry. A second application may be required when treating persistent stains. Do not repeat more than 6 times per year. Do not apply if heavy rain is expected within 4-5 hours. Always wear safety goggles and rubber gloves when mixing and using Spray & Go.
Cleaning Instructions | Product Information | Product Showcase