eXIMO® FAQ

How often should eXIMO® be applied?
eXIMO should be applied whenever the concrete begins to lose the cleanliness achieved from prior application. Target stains should be treated as necessary. Application frequency will vary per site based on traffic and oil accumulation. An average fuel location should apply the product every 1-3 weeks -- other structures like parking areas range from 3 to 6 months.

How much eXIMO® product should be applied per application?
eXIMO's coverage area can vary depending on the cement's surface texture; rougher surfaces require more product. On average, 1 cup can cover 220 sq. ft. It is best to start with a smaller amount of product, applying additional product more frequently as needed. Continue sweeping to disperse adequately.

What preparations are needed before applying eXIMO®?
Clear away any debris and dispose of any trash. Concrete should be 100% dry before applying eXIMO. Remember, cone off the area to be treated and follow all safety procedures.

Do I have to block off the entire operation when applying eXIMO®?
No -- only section off the work area necessary to ensure personnel safety. After the application, the area is ready for use. You can treat one section at a time, while leaving other areas open for business.

How do I know when I'm done applying eXIMO®?
Application is complete when the product has been evenly spread out and no excess product remains. If excess product remains, continue sweeping product (even into new areas) until all product is dispersed.

The application is creating a lot of dust. Am I doing something wrong?
An excess amount of product during application could be the problem. Try applying the minimum amount of product required to treat a smaller area of concrete surface. eXIMO should NOT be applied during extreme winds or gusty conditions.

Is eXIMO® better than pressure washing my location?
Yes. Unlike pressure washing, eXIMO is environmentally friendly and does not violate environmental regulations. Waterless cleaning is more efficient and leaves a brighter, cleaner surface. Application does not require closing off entire sections. eXIMO can be applied one section at a time, minimizing operation impact.

Is it true that eXIMO® should be applied to new locations before opening?
Yes. eXIMO's high specific gravity works to fill the pores of concrete. Applying product before opening creates a bioorganic culture that works even faster to consume future stains.

How do I reorder eXIMO®?
Ordering eXIMO is easy! eXIMO may be reordered by: telephone 425.837.0025 or faxing orders to 206.202.0444.